China K Series Helical Gear Reducer Gearbox Shaft Bevel Gear 90 Degree spiral bevel gear

Merchandise Description

K collection helical gear reducer gearbox shaft bevel equipment 90 degree

Solution Description


Description: K Series Helical Bevel Gearbox

Overview
(1) Input manner: coupled motor, belted motor, input shaft or connection flange.
(2) Proper angle output.
(3) Compact construction.
(4) Rigid tooth face.
(5) Carrying higher torque, substantial loading potential.
(6) High precision gear, making certain the device to operate stably, clean transmission.
(7) Minimal sounds, lengthy lifespan.
(8) Big overlap coefficient, abrasion resistant.

Detailed Images

K collection equipment models are obtainable in the following styles:
KAZ..Y..Limited-flange-mounted helical-bevel equipment units with hollow shaft
K…Y…Foot-mounted helical-bevel gear models with solid shaft
KAT…Y…Torque-arm-mounted helical-bevel gear models with hollow shaft
KAB…Y…Foot-mounted helical-bevel equipment models with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S…Shaft input helical-bevel gear models
KA…Y…Helical-bevel equipment models with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y..Combinatorial helical-bevel equipment units
KF…Y…Flange-mounted helical-bevel gear units with sound shaft
KA(K, KF ,KAF ,KAZ)S…R…Shaft enter combinatorial helical-bevel equipment models
KAF…Y…Flange-mounted helical-bevel equipment models with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y…When equipping the user’s motor or the specific 1 ,the flange is required to be linked

The weights are suggest values, only for reference.
Greatest torque signifies the largest 1 of the maximum torque relevant to the different ratio for the specified dimensions.

Rated Power:.18KW~200KW
Rated Torque:Up to 50000N.m
Equipment Arrangement:Bevel Helical Hardened Gearbox
Input Speed:50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Ratio:5.36~192.18

Solution Parameters

Structure:

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted .18-200kw .1-270r/min Up to 50000Nm

Input electrical power score and optimum torque:

Measurement
 
38 48 58 sixty eight 78 88 ninety eight 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Enter electricity rating(kw)
 
.18~
3.
.eighteen~
3.
.18~
five.five
.18~
five.5
.37~
11
.seventy five~
22
1.3~
30
3~
forty five
seven.5~
ninety
11~
a hundred and sixty
11~
two hundred
18.5~
200
Ratio 5.36~
106.38
5.eighty one~
131.87
six.fifty seven~
a hundred forty five.15
seven.fourteen~
forty four.79
seven.22~
192.eighteen
7.19~
197.27
8.ninety five~
one hundred seventy five.forty seven
8.74~
141.93
eight.68~
146.07
12.66~
a hundred and fifty.03
17.35~1
64.forty four
17.97~
178.37
Highest
Torque(N.m)
 
two hundred four hundred 600 820 1550 2770 4300 8000 13000 18000 32000 50000

Equipment unit fat:

Size
 
38 48 58 sixty eight seventy eight 88 ninety eight 108 128 158 168 188
Weight
 
11 twenty 27 33 fifty seven 85 one hundred thirty 250 380 610 1015 1700

 

Packaging & Delivery

Company Profile

After Income Support

Pre-sale services one. Select products design.
two.Design and style and manufacture items according to clients’ unique prerequisite.
3.Teach complex individual for consumers
Services in the course of offering one.Pre-check and take products in advance of supply.
two. Help customers to draft resolving plans.
After-sale companies one.Aid clientele to get ready for the very first development scheme.
two. Prepare the 1st-line operators.
three.Consider initiative to eradicate the difficulties rapidly.
four. Give specialized exchanging.

FAQ

1. How to decide on a gearbox which meets our prerequisite?
You can refer to our catalogue to decide on the gearbox or we can aid to select when you offer
the complex details of needed output torque, output velocity and motor parameter and so on.
2. What info shall we give prior to putting a obtain order?
a) Kind of the gearbox, ratio, input and output type, enter flange, mounting place, and motor details etc.
b) Housing coloration.
c) Buy amount.
d) Other particular needs.
three. What industries are your gearboxes currently being used?
Our gearboxes are broadly utilised in the regions of textile, foods processing, beverage, chemical market,
escalator,computerized storage equipment, metallurgy, environmental protection, logistics and and so forth.
four.Do you provide any visiting?
Indeed! We sincerely invite you to check out us! We can select you from airport, railway station and so on. Also, we can set up housing for you. Remember to enable us know in innovative.
5.Is your good quality good?
High quality by no means tell lies, we are theprofessional manufacturer and exporter of equipment reducer and motor in Asia, who has been provided license because 1982. Also, we had reached ISO9001 and CE Certificate amongst all producers.

 

Contact:

If you are fascinated in our solution, welcome you speak to me.
Our staff will assistance any want you might have.

US $70-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
 
0.18~
3.0
0.18~
3.0
0.18~
5.5
0.18~
5.5
0.37~
11
0.75~
22
1.3~
30
3~
45
7.5~
90
11~
160
11~
200
18.5~
200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~
44.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~1
64.44
17.97~
178.37
Maximum
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Weight
 
11 20 27 33 57 85 130 250 380 610 1015 1700

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
US $70-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
 
0.18~
3.0
0.18~
3.0
0.18~
5.5
0.18~
5.5
0.37~
11
0.75~
22
1.3~
30
3~
45
7.5~
90
11~
160
11~
200
18.5~
200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~
44.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~1
64.44
17.97~
178.37
Maximum
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Weight
 
11 20 27 33 57 85 130 250 380 610 1015 1700

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

Types of Miter Gears

The different types of miter gears include Hypoid, Crown, and Spiral. To learn more, read on. In addition, you’ll learn about their differences and similarities. This article will provide an overview of the different types of miter gears. You can also choose the type that fits your needs by using the guide below. After you’ve read it, you’ll know how to use them in your project. You’ll also learn how to pair them up by hand, which is particularly useful if you’re working on a mechanical component.
gear

Bevel gears

Bevel and miter gears are both used to connect two shafts that have different axes. In most cases, these gears are used at right angles. The pitch cone of a bevel gear has the same shape as that of a spur gear, except the tooth profile is slightly tapered and has variable depth. The pinions of a bevel gear are normally straight, but can be curved or skew-shaped. They can also have an offset crown wheel with straight teeth relative to the axis.
In addition to their industrial applications, miter gears are found in agriculture, bottling, printing, and various industrial sectors. They are used in coal mining, oil exploration, and chemical processes. They are an important part of conveyors, elevators, kilns, and more. In fact, miter gears are often used in machine tools, like forklifts and jigsaws.
When considering which gear is right for a certain application, you’ll need to think about the application and the design goals. For example, you’ll want to know the maximum load that the gear can carry. You can use computer simulation programs to determine the exact torque required for a specific application. Miter gears are bevel gears that are geared on a single axis, not two.
To calculate the torque required for a particular application, you’ll need to know the MA of each bevel gear. Fortunately, you can now do so with CZPT. With the help of this software, you can generate 3D models of spiral bevel gears. Once you’ve created your model, you can then machine it. This can make your job much easier! And it’s fun!
In terms of manufacturing, straight bevel gears are the easiest to produce. The earliest method for this type of gear is a planer with an indexing head. Since the development of CNC machining, however, more effective manufacturing methods have been developed. These include CZPT, Revacycle, and Coniflex systems. The CZPT uses the Revacycle system. You can also use a CNC mill to manufacture spiral bevel gears.
gear

Hypoid bevel gears

When it comes to designing hypoid bevel gears for miter and other kinds of gears, there are several important parameters to consider. In order to produce high-quality gearings, the mounting distance between the gear teeth and the pinion must be within a predefined tolerance range. In other words, the mounting distance between the gear teeth and pinion must be 0.05 mm or less.
To make this possible, the hypoid bevel gearset mesh is designed to involve sliding action. The result is a quiet transmission. It also means that higher speeds are possible without increasing noise levels. In comparison, bevel gears tend to be noisy at high speeds. For these reasons, the hypoid gearset is the most efficient way to build miter gears. However, it’s important to keep in mind that hypoid gears are not for every application.
Hypoid bevel gears are analogous to spiral bevels, but they don’t have intersecting axes. Because of this, they can produce larger pinions with smooth engagement. Crown bevel gears, on the other hand, have a 90-degree pitch and parallel teeth. Their geometry and pitch is unique, and they have particular geometrical properties. There are different ways to express pitch. The diametral pitch is the number of teeth, while circumferential measurement is called the circumference.
The face-milling method is another technique used for the manufacture of hypoid and spiral bevel gears. Face-milling allows gears to be ground for high accuracy and surface finish. It also allows for the elimination of heat treatment and facilitates the creation of predesigned ease-off topographies. Face-milling increases mechanical resistance by as much as 20%. It also reduces noise levels.
The ANSI/AGMA/ISO standards for geometric dimensioning differ from the best practices for manufacturing hypoid and bevel gears. The violation of common datum surfaces leads to a number of geometrical dimensioning issues. Moreover, hypoid gears need to be designed to incorporate the base pitches of the mating pinion and the hypoid bevel gear. This is not possible without knowing the base pitch of the gear and the mating pinion.

Crown bevel gears

When choosing crown bevels for a miter gear, you will need to consider a number of factors. Specifically, you will need to know the ratio of the tooth load to the bevel gear pitch radius. This will help you choose a bevel gear that possesses the right amount of excitation and load capacity. Crown bevels are also known as helical gears, which are a combination of two bevel gear types.
These bevel gears differ from spiral bevels because the bevels are not intersected. This gives you the flexibility of using a larger pinion and smoother engagement. Crown bevel gears are also named for their different tooth portions: the toe, or the part of the gear closest to the bore, and the heel, or the outermost diameter. The tooth height is smaller at the toe than it is at the heel, but the height of the gear is the same at both places.
Crown bevel gears are cylindrical, with teeth that are angled at an angle. They have a 1:1 gear ratio and are used for miter gears and spur gears. Crown bevel gears have a tooth profile that is the same as spur gears but is slightly narrower at the tip, giving them superior quietness. Crown bevel gears for miter gears can be made with an offset pinion.
There are many other options available when choosing a Crown bevel gear for miter gears. The material used for the gears can vary from plastics to pre-hardened alloys. If you are concerned with the material’s strength, you can choose a pre-hardened alloy with a 32-35 Rc hardness. This alloy also has the advantage of being more durable than plastic. In addition to being stronger, crown bevel gears are also easier to lubricate.
Crown bevel gears for miter gears are similar to spiral bevels. However, they have a hyperbolic, not conical, pitch surface. The pinion is often offset above or below the center of the gear, which allows for a larger diameter. Crown bevel gears for miter gears are typically larger than hypoid gears. The hypoid gear is commonly used in automobile rear axles. They are useful when the angle of rotation is 90 degrees. And they can be used for 1:1 ratios.
gear

Spiral miter gears

Spiral bevel gears are produced by machining the face surface of the teeth. The process follows the Hertz theory of elastic contact, where the dislocations are equivalent to small significant dimensions of the contact area and the relative radii of curvature. This method assumes that the surfaces are parallel and that the strains are small. Moreover, it can reduce noise. This makes spiral bevel gears an ideal choice for high-speed applications.
The precision machining of CZPT spiral miter gears reduces backlash. They feature adjustable locking nuts that can precisely adjust the spacing between the gear teeth. The result is reduced backlash and maximum drive life. In addition, these gears are flexible enough to accommodate design changes late in the production process, reducing risk for OEMs and increasing efficiency and productivity. The advantages of spiral miter gears are outlined below.
Spiral bevel gears also have many advantages. The most obvious of these advantages is that they have large-diameter shafts. The larger shaft size allows for a larger diameter gear, but this means a larger gear housing. In turn, this reduces ground clearance, interior space, and weight. It also makes the drive axle gear larger, which reduces ground clearance and interior space. Spiral bevel gears are more efficient than spiral bevel gears, but it may be harder to find the right size for your application.
Another benefit of spiral miter gears is their small size. For the same amount of power, a spiral miter gear is smaller than a straight cut miter gear. Moreover, spiral bevel gears are less likely to bend or pit. They also have higher precision properties. They are suitable for secondary operations. Spiral miter gears are more durable than straight cut ones and can operate at higher speeds.
A key feature of spiral miter gears is their ability to resist wear and tear. Because they are constantly being deformed, they tend to crack in a way that increases their wear and tear. The result is a harder gear with a more contoured grain flow. But it is possible to restore the quality of your gear through proper maintenance. If you have a machine, it would be in your best interest to replace worn parts if they aren’t functioning as they should.

China K Series Helical Gear Reducer Gearbox Shaft Bevel Gear 90 Degree     spiral bevel gearChina K Series Helical Gear Reducer Gearbox Shaft Bevel Gear 90 Degree     spiral bevel gear
editor by czh 2023-01-19